Tag Archives: Benson Concrete Construction

Snow Blowers For Snow Removal

Those machines are becoming increasingly popular with homeowners. Electricity, coal, or diesel fuel can power snow blowers. They’re successful when the snow isn’t disturbed and eliminate any loose snow. A they are sometimes used in combination with a snow plow. The loose, unpacked snow can be collected by using a snow blower while the rest is removed manually with a shovel. This makes for a plowed area that looks clean and presentable, and takes a lot of pressure away from the snow remover or home owner. Unlike a snow plow, which uses force to either move the snow forward or sideward, a snow blower is used to redirect the snow to another location. While using the machine, some machines will have a manual control which will allow the user to guide where the snow should go. Such machines are either classified as single or two-stage machines. Checkout Benson Concrete Construction LLC near Millsboro.

Single-stage devices use a single high-speed plastic or metal disk, which serves as an impeller. This drives the snow into the trap, while simultaneously pushing it out of the chute. The impeller, which can also be called the “fan,” is normally two blades parallel to a paddle with a similar shape. The curve of course draws the snow to the middle of the unit, where the chute base is located. Single-stage blowers are used to clear light snow, and often involve multiple “plows” across the same area.

Two-stage blowers are made of metal, with one or more augers. They run at a lower speed and are used before being pushed into a higher speed impeller to break up the snow. Similar to the one-stage blower, the impeller pushes the snow through the chute with much greater force though. Two-stage machines are more popular and are typically used in snow removal situations which are more complicated. The power spectrum applied to two-stage machines is quite considerable. We range from a few horsepower to over a horse-power of 1000. We are successful for quick removal of a lot of snow. Two-stage snow blowers are typically driven by either tires, chains tires and in some cases, tracks. Others also have the option to have a detachable face that can be substituted for something like a rotary tiller.

The augers used in two-stage snow blowers have what is called a shear ring. This pin helps to prevent damage to the auger gears. Should a jam occur the shear pin breaks down. This will keep the auger gears from being harmed. Nonetheless, this must be repaired once the pin has been removed. It is a simple process on most2-stage snow blower machines.